The LITTLE-BLASTER equipment was designed for the hobbyist or very light production use. The LITTLE-BLASTER is constructed from heavy gauge metal, which is continuously welded. Also incorporated into the line are several products from the BLAST-IT-ALL® production blasting equipment, proven reliability such as the blast gun. The LITTLE-BLASTER is also designed for a small company to start blasting with only a dust collector; then, without a lot of expense enables that user to convert to a reclamation system with the LITTLE-BLASTER Reclaimer Kit.
While, the LITTLE-BLASTER is limited to specifically smaller sizes than production type equipment, but it is considered the highest caliber blaster manufactured today.
Choose a model below for more information.
Includes:
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Shaker Handle: Handle for shaking dust from cartridge.
Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats.
Dust Sump: Allows dust to flow directly into waste container.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Motor: 120 volt, 15 amp switch control.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Media Blast Gun: Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow. 1/8″ air jet supplied as standard. 5/32″ – 3/16″ air jets with sized nozzles supplied upon request.
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim Kit
Suction Gun Air Requirements | ||||
1/4″ Nozzle – 1/8″ Air Jet | ||||
5/16″ Nozzle – 5/32″ Air Jet | ||||
3/8″ Nozzle – 3/16″ Air Jet |
- General Information
-
Includes:
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Shaker Handle: Handle for shaking dust from cartridge.
Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats.
Dust Sump: Allows dust to flow directly into waste container.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Motor: 120 volt, 15 amp switch control.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Media Blast Gun: Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow. 1/8″ air jet supplied as standard. 5/32″ – 3/16″ air jets with sized nozzles supplied upon request.
- More Info
-
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim KitSuction Gun Air Requirements Gun# 40 PSI 60 PSI 80 PSI 1/4″ Nozzle – 1/8″ Air Jet #4 12 CFM 17 CFM 21 CFM 5/16″ Nozzle – 5/32″ Air Jet #5 19 CFM 27 CFM 34 CFM 3/8″ Nozzle – 3/16″ Air Jet #6 27 CFM 37 CFM 47 CFM
Includes:
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean Out Door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Shaker Handle: Handle for shaking dust from cartridge.
Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats.
Dust Sump: Allows dust to flow directly into waste container.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Motor: 120 volt, 15 amp switch control.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Media Blast Gun: Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.
1/8″ air jet supplied as standard. 5/32″ – 3/16″ air jets with sized nozzles supplied upon request.
Includes:
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean Out Door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Shaker Handle: Handle for shaking dust from cartridge.
Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats.
Dust Sump: Allows dust to flow directly into waste container.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Motor: 120 volt, 15 amp switch control.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Media Blast Gun: Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.
1/8″ air jet supplied as standard. 5/32″ – 3/16″ air jets with sized nozzles supplied upon request.

Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim Kit
Suction Gun Air Requirements | ||||
1/4″ Nozzle – 1/8″ Air Jet | ||||
5/16″ Nozzle – 5/32″ Air Jet | ||||
3/8″ Nozzle – 3/16″ Air Jet |
- General Information
-
Includes:
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean Out Door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Shaker Handle: Handle for shaking dust from cartridge.
Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats.
Dust Sump: Allows dust to flow directly into waste container.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Motor: 120 volt, 15 amp switch control.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Media Blast Gun: Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.
1/8″ air jet supplied as standard. 5/32″ – 3/16″ air jets with sized nozzles supplied upon request.
Includes:
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean Out Door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Shaker Handle: Handle for shaking dust from cartridge.
Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats.
Dust Sump: Allows dust to flow directly into waste container.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Motor: 120 volt, 15 amp switch control.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Media Blast Gun: Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.
1/8″ air jet supplied as standard. 5/32″ – 3/16″ air jets with sized nozzles supplied upon request.
- More Info
-
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim KitSuction Gun Air Requirements Gun# 40 PSI 60 PSI 80 PSI 1/4″ Nozzle – 1/8″ Air Jet #4 12 CFM 17 CFM 21 CFM 5/16″ Nozzle – 5/32″ Air Jet #5 19 CFM 27 CFM 34 CFM 3/8″ Nozzle – 3/16″ Air Jet #6 27 CFM 37 CFM 47 CFM
Includes:
Reclaimer: High performance 300 CFM cyclone type reclaimer.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and reclaimer.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Motor: 1/2 HP, 120 volts, 11 amp, 3450 rpm switch controlled.
Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris.
Fill Door: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
Sump Hose: 4″ flexable duct hose, from machine sump outlet to reclaimer inlet.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Media Hose: 1/2″ media line hose from reclaimer media valve to bottom fitting on blast gun.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Media Blast Gun:
Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.
1/8″ air jet supplied as standard. 5/32″ – 3/16″ air jets with sized nozzles supplied upon request.


Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim Kit
Suction Gun Air Requirements | ||||
1/4″ Nozzle – 1/8″ Air Jet | ||||
5/16″ Nozzle – 5/32″ Air Jet | ||||
3/8″ Nozzle – 3/16″ Air Jet |
- General Information
-
Includes:
Reclaimer: High performance 300 CFM cyclone type reclaimer.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and reclaimer.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Motor: 1/2 HP, 120 volts, 11 amp, 3450 rpm switch controlled.
Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris.
Fill Door: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
Sump Hose: 4″ flexable duct hose, from machine sump outlet to reclaimer inlet.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Media Hose: 1/2″ media line hose from reclaimer media valve to bottom fitting on blast gun.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Media Blast Gun:
Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.1/8″ air jet supplied as standard. 5/32″ – 3/16″ air jets with sized nozzles supplied upon request.
- More Info
-
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim KitSuction Gun Air Requirements Gun# 40 PSI 60 PSI 80 PSI 1/4″ Nozzle – 1/8″ Air Jet #4 12 CFM 17 CFM 21 CFM 5/16″ Nozzle – 5/32″ Air Jet #5 19 CFM 27 CFM 34 CFM 3/8″ Nozzle – 3/16″ Air Jet #6 27 CFM 37 CFM 47 CFM
Includes:
Reclaimer: High performance 400 CFM cyclone reclaim separates good media from dust and by-products.
Light Box: 24 Inch LED light fixture, for the best possible lighting in the blast chamber. ON-OFF control switch for light and reclaimer.
Viewing Window: Large 12″ x 20″ tempered glass provides long life and minimizes static build-up of dust.
Door Latch: Heavy duty cam type, adjustable for positive door seal.
Glove Arm Hole: Snap-In heavy duty cloth lined vinyl gloves allowing easy access of handling parts in blast chamber.
Air Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean Out Door: Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see Figure “C”. Knife sealing edge assures positive seal in blast chamber.
Motor: 1/2 HP, 120 volts, 11 amp, 3450 rpm, switch controlled.
Dust Collector: Twenty-five tubular cotton sateen dust bags, with slide gate hopper, fan rated at 400 CFM.
Fill Door: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
Sump Hose: 4″ flexible duct hose from machine sump outlet to reclaimer inlet.
Media Valve: Universal feed allowing all types of abrasives to be used. 2″ drain plug outlet for easy clean-out.
Media Hose: 1/2″ media line hose from reclaimer media valve to bottom fitting on blast gun.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Mylar Dispenser: Window Protector.
Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim Kit
Suction Gun Air Requirements | ||||
1/4″ Nozzle – 1/8″ Air Jet | ||||
5/16″ Nozzle – 5/32″ Air Jet | ||||
3/8″ Nozzle – 3/16″ Air Jet |
- General Information
-
Includes:
Reclaimer: High performance 400 CFM cyclone reclaim separates good media from dust and by-products.
Light Box: 24 Inch LED light fixture, for the best possible lighting in the blast chamber. ON-OFF control switch for light and reclaimer.
Viewing Window: Large 12″ x 20″ tempered glass provides long life and minimizes static build-up of dust.
Door Latch: Heavy duty cam type, adjustable for positive door seal.
Glove Arm Hole: Snap-In heavy duty cloth lined vinyl gloves allowing easy access of handling parts in blast chamber.
Air Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean Out Door: Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see Figure “C”. Knife sealing edge assures positive seal in blast chamber.
Motor: 1/2 HP, 120 volts, 11 amp, 3450 rpm, switch controlled.
Dust Collector: Twenty-five tubular cotton sateen dust bags, with slide gate hopper, fan rated at 400 CFM.
Fill Door: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
Sump Hose: 4″ flexible duct hose from machine sump outlet to reclaimer inlet.
Media Valve: Universal feed allowing all types of abrasives to be used. 2″ drain plug outlet for easy clean-out.
Media Hose: 1/2″ media line hose from reclaimer media valve to bottom fitting on blast gun.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Mylar Dispenser: Window Protector.
Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
- More Info
-
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim KitSuction Gun Air Requirements Gun# 40 PSI 60 PSI 80 PSI 1/4″ Nozzle – 1/8″ Air Jet #4 12 CFM 17 CFM 21 CFM 5/16″ Nozzle – 5/32″ Air Jet #5 19 CFM 27 CFM 34 CFM 3/8″ Nozzle – 3/16″ Air Jet #6 27 CFM 37 CFM 47 CFM
Includes:
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12″X20″ Lexan window provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Manual Foot Control: Manual control of blast through a full flow valve.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Shaker Handle: Handle for shaking dust from cartridge.
Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats.
Dust Sump: Allows dust to flow directly into waste container.
Media Hose: 1/2″ media hose.
Media Valve: Adjustable media valve.
Motor: 120 volt, 15 amp switch control.
Pressure Pot: ASME Coded, one cu. ft. capacity. Air pressure, regulator / filter. Adjustable media valve. Manual blow down.
Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
Air Requirements | |||
3/16″ nozzle | |||
1/4″ nozzle | |||
5/16″ nozzle |
- General Information
-
Includes:
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12″X20″ Lexan window provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Manual Foot Control: Manual control of blast through a full flow valve.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Shaker Handle: Handle for shaking dust from cartridge.
Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats.
Dust Sump: Allows dust to flow directly into waste container.
Media Hose: 1/2″ media hose.
Media Valve: Adjustable media valve.
Motor: 120 volt, 15 amp switch control.
Pressure Pot: ASME Coded, one cu. ft. capacity. Air pressure, regulator / filter. Adjustable media valve. Manual blow down.
Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
- More Info
-
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In TurntableAir Requirements 40 PSI 60 PSI 80 PSI 3/16″ nozzle 21 CFM 32 CFM 41 CFM 1/4″ nozzle 41 CFM 56 CFM 72 CFM 5/16″ nozzle 64 CFM 88 CFM 113 CFM
Includes:
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Shaker Handle: Handle for shaking dust from cartridge
Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats
Dust Sump: Allows dust to flow directly into waste container.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Motor: 120 volt, 15 amp switch control.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim Kit
Suction Gun Air Requirements | ||||
1/4″ Nozzle – 1/8″ Air Jet | ||||
5/16″ Nozzle – 5/32″ Air Jet | ||||
3/8″ Nozzle – 3/16″ Air Jet |
- General Information
-
Includes:
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Shaker Handle: Handle for shaking dust from cartridge
Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats
Dust Sump: Allows dust to flow directly into waste container.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Motor: 120 volt, 15 amp switch control.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
- More Info
-
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim KitSuction Gun Air Requirements Gun# 40 PSI 60 PSI 80 PSI 1/4″ Nozzle – 1/8″ Air Jet #4 12 CFM 17 CFM 21 CFM 5/16″ Nozzle – 5/32″ Air Jet #5 19 CFM 27 CFM 34 CFM 3/8″ Nozzle – 3/16″ Air Jet #6 27 CFM 37 CFM 47 CFM
Includes:
Reclaimer: High performance 300 CFM cyclone type reclaimer.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and reclaimer.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean Out Door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Motor: 1/2 HP, 120 volts, 11 amp, 3450 rpm switch controlled.
Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris.
Fill Door: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
Sump Hose: 4″ flexable duct hose, from machine sump outlet to reclaimer inlet.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Media Hose: 1/2″ media line hose from reclaimer media valve to bottom fitting on blast gun.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim Kit
Suction Gun Air Requirements | ||||
1/4″ Nozzle – 1/8″ Air Jet | ||||
5/16″ Nozzle – 5/32″ Air Jet | ||||
3/8″ Nozzle – 3/16″ Air Jet |
- General Information
-
Includes:
Reclaimer: High performance 300 CFM cyclone type reclaimer.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and reclaimer.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean Out Door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Motor: 1/2 HP, 120 volts, 11 amp, 3450 rpm switch controlled.
Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris.
Fill Door: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
Sump Hose: 4″ flexable duct hose, from machine sump outlet to reclaimer inlet.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Media Hose: 1/2″ media line hose from reclaimer media valve to bottom fitting on blast gun.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
- More Info
-
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim KitSuction Gun Air Requirements Gun# 40 PSI 60 PSI 80 PSI 1/4″ Nozzle – 1/8″ Air Jet #4 12 CFM 17 CFM 21 CFM 5/16″ Nozzle – 5/32″ Air Jet #5 19 CFM 27 CFM 34 CFM 3/8″ Nozzle – 3/16″ Air Jet #6 27 CFM 37 CFM 47 CFM
Includes:
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12 3/8″X20 1/2″ tempered glass provides long life and minimizes static build up of dust.
Lift Handle: For lifting top of cabinet for loading and unloading.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean Out Door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Blast Chamber Opening: Large oyster shell opening. For size see figure C.
Shaker Handle: Handle for shaking dust from cartridge
Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats
Dust Sump: Allows dust to flow directly into waste container.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Motor: 120 volt, 15 amp switch control.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Support: Leg and cabinet support for balance of cabinet when top is opened.
Support Stop Bracket: Allows top of cabinet to support itself when fully opened.
Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim Kit
Suction Gun Air Requirements | ||||
1/4″ Nozzle – 1/8″ Air Jet | ||||
5/16″ Nozzle – 5/32″ Air Jet | ||||
3/8″ Nozzle – 3/16″ Air Jet |
- General Information
-
Includes:
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12 3/8″X20 1/2″ tempered glass provides long life and minimizes static build up of dust.
Lift Handle: For lifting top of cabinet for loading and unloading.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean Out Door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Blast Chamber Opening: Large oyster shell opening. For size see figure C.
Shaker Handle: Handle for shaking dust from cartridge
Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats
Dust Sump: Allows dust to flow directly into waste container.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Motor: 120 volt, 15 amp switch control.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Support: Leg and cabinet support for balance of cabinet when top is opened.
Support Stop Bracket: Allows top of cabinet to support itself when fully opened.
Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
- More Info
-
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim KitSuction Gun Air Requirements Gun# 40 PSI 60 PSI 80 PSI 1/4″ Nozzle – 1/8″ Air Jet #4 12 CFM 17 CFM 21 CFM 5/16″ Nozzle – 5/32″ Air Jet #5 19 CFM 27 CFM 34 CFM 3/8″ Nozzle – 3/16″ Air Jet #6 27 CFM 37 CFM 47 CFM
Includes:
Reclaimer: High performance 300 CFM cyclone type reclaimer.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12 3/8″X20 1/2″ tempered glass provides long life and minimizes static build up of dust.
Lift Handle: For lifting top of cabinet for loading and unloading.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean Out Door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Blast Chamber Opening: Large oyster shell opening. For size see figure C.
Shaker Handle: Handle for shaking dust from cartridge
Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris.
Fill Door: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Motor: 1/2 HP, 120 volts, 11 amp, 3450 rpm switch controlled.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Support: Leg and cabinet support for balance of cabinet when top is opened.
Support Stop Bracket: Allows top of cabinet to support itself when fully opened.
Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim Kit
Suction Gun Air Requirements | ||||
1/4″ Nozzle – 1/8″ Air Jet | ||||
5/16″ Nozzle – 5/32″ Air Jet | ||||
3/8″ Nozzle – 3/16″ Air Jet |
- General Information
-
Includes:
Reclaimer: High performance 300 CFM cyclone type reclaimer.
Light Box: 24 Inch LED light fixture, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
Viewing Window: Large 12 3/8″X20 1/2″ tempered glass provides long life and minimizes static build up of dust.
Lift Handle: For lifting top of cabinet for loading and unloading.
Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean Out Door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Prevents accidental blast operation.
Blast Chamber Opening: Large oyster shell opening. For size see figure C.
Shaker Handle: Handle for shaking dust from cartridge
Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris.
Fill Door: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
Motor: 1/2 HP, 120 volts, 11 amp, 3450 rpm switch controlled.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Support: Leg and cabinet support for balance of cabinet when top is opened.
Support Stop Bracket: Allows top of cabinet to support itself when fully opened.
Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
- More Info
-
Machine Options
Blow-Off nozzle Kit
Air-Line Moisture Trap
20″ Set-In Turntable
2 Gallon Tumble Basket
300 CFM Reclaim KitSuction Gun Air Requirements Gun# 40 PSI 60 PSI 80 PSI 1/4″ Nozzle – 1/8″ Air Jet #4 12 CFM 17 CFM 21 CFM 5/16″ Nozzle – 5/32″ Air Jet #5 19 CFM 27 CFM 34 CFM 3/8″ Nozzle – 3/16″ Air Jet #6 27 CFM 37 CFM 47 CFM
Includes:
Motor: 1/2 HP, 120 volts, 11 amp, 3450 rpm, switch controlled.
Reclaimer: High performance 300 CFM cyclone type reclaimer separates good media from dust and by-products.
Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris.
Fill Door: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
Media Valve: Universal feed allowing all types of abrasives to be used. 2″ drain plug outlet for easy clean-out.
Media Hose: 1/2″ media line hose from reclaimer media valve to bottom fitting on blast gun.
Sump Hose: 4″ flexible duct hose, from machine sump outlet to reclaimer inlet.
Door Opening: Large 13″ wide x 15″ tall opening. For easy removable and replacing tumble basket.
Switch: When door is closed and switch contact striker makes contact, the timer becomes operational. Blast gun and tumbler rotation will start.
Timer: Set timer switch to desired minutes for blast action and tumbler rotation. 0-30 minutes.
Gauge: Shows desired gun air pressure.
Tumble Basket: Large 10″ x 10″ basket. May be removed for easy loading and unloading. 15 pounds capacity.
Air Flow Regulator: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Blast Gun Mount: Blast gun is mounted and directed into basket to a desired position.
Switch Contact Striker: Makes contact with switch (#9) to start blast action.
Door Latch: Heavy duty positive cam type, adjustable for complete door seal.
Gasket: Large 1″ wide x 1/2″ thick gasket to provide a leak proof seal with cabinet knife edge.
Sump Outlet: Flexible duct hose connection.
Machine Options
Blow-Off & Digital Timer
Suction Gun Air Requirements | ||||
1/4″ Nozzle – 1/8″ Air Jet | ||||
5/16″ Nozzle – 5/32″ Air Jet | ||||
3/8″ Nozzle – 3/16″ Air Jet |
- General Information
-
Includes:
Motor: 1/2 HP, 120 volts, 11 amp, 3450 rpm, switch controlled.
Reclaimer: High performance 300 CFM cyclone type reclaimer separates good media from dust and by-products.
Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris.
Fill Door: To add media to machine and remove debris from debris screen basket inside reclaimer, adjustable air intake on door.
Media Valve: Universal feed allowing all types of abrasives to be used. 2″ drain plug outlet for easy clean-out.
Media Hose: 1/2″ media line hose from reclaimer media valve to bottom fitting on blast gun.
Sump Hose: 4″ flexible duct hose, from machine sump outlet to reclaimer inlet.
Door Opening: Large 13″ wide x 15″ tall opening. For easy removable and replacing tumble basket.
Switch: When door is closed and switch contact striker makes contact, the timer becomes operational. Blast gun and tumbler rotation will start.
Timer: Set timer switch to desired minutes for blast action and tumbler rotation. 0-30 minutes.
Gauge: Shows desired gun air pressure.
Tumble Basket: Large 10″ x 10″ basket. May be removed for easy loading and unloading. 15 pounds capacity.
Air Flow Regulator: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Blast Gun Mount: Blast gun is mounted and directed into basket to a desired position.
Switch Contact Striker: Makes contact with switch (#9) to start blast action.
Door Latch: Heavy duty positive cam type, adjustable for complete door seal.
Gasket: Large 1″ wide x 1/2″ thick gasket to provide a leak proof seal with cabinet knife edge.
Sump Outlet: Flexible duct hose connection.
- More Info
-
Machine Options
Blow-Off & Digital Timer
Suction Gun Air Requirements Gun# 40 PSI 60 PSI 80 PSI 1/4″ Nozzle – 1/8″ Air Jet #4 12 CFM 17 CFM 21 CFM 5/16″ Nozzle – 5/32″ Air Jet #5 19 CFM 27 CFM 34 CFM 3/8″ Nozzle – 3/16″ Air Jet #6 27 CFM 37 CFM 47 CFM