Magnum

MVC-004L_small (1)

Available in larger sizes (44″ and 55″ wide) than our Little Blaster series, our Magnum series blast cabinets are offered in suction or pressure models.  The Magnum incorporates many of the same features found in our little blaster line and are suitable for either shop or industrial applications.  The Magnum uses our more powerful 400 or 600 cfm reclaimers to insure good media is separated from dust.

 

Choose a model below for more information.

Model 4436-4

Includes:

Reclaimer: High performance 400 or 600 CFM cyclone type reclaimer separates good media from dust and by products.

Light Box: Two (2) tube 24: fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and reclaim.

Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.

Door Latch: Heavy-duty cam type, adjustable for positive door seal.

Glove Arm Hole: Heavy-duty cloth lined vinyl gloves are snap-in and quick changing, allowing easy access of handling parts in blast chamber.

Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.

Clean out door: Allows recovery of small parts that may fall from blast chamber.

Safety Foot Control: Floating foot control.

Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.

Motor: 400 CFM, 1/2 HP, 120 VOLTS, 11 AMP, 3450 RPM or 600 CFM, 1 HP, 120 VOLTS, 16 AMP, 3450 RPM.

Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris. Optional dust collector available.

Fill Door: to add media to machine and remove debris from debris screen basket inside reclaimer.

Sump Hose: 4″ flexible duct hose, from machine sump outlet to reclaimer inlet.

Media Valve: Universal feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean out.

Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.

Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.

Mylar Dispenser: Holds roll of mylar to protect viewing window. (not shown).

MVC-004L_small (1)MVC-005L_smallimage002 (1)image004 (1)
image007

image009

Inquire About This Model Inquire About This Model
+ General Information

Includes:

Reclaimer: High performance 400 or 600 CFM cyclone type reclaimer separates good media from dust and by products.

Light Box: Two (2) tube 24: fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and reclaim.

Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.

Door Latch: Heavy-duty cam type, adjustable for positive door seal.

Glove Arm Hole: Heavy-duty cloth lined vinyl gloves are snap-in and quick changing, allowing easy access of handling parts in blast chamber.

Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.

Clean out door: Allows recovery of small parts that may fall from blast chamber.

Safety Foot Control: Floating foot control.

Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.

Motor: 400 CFM, 1/2 HP, 120 VOLTS, 11 AMP, 3450 RPM or 600 CFM, 1 HP, 120 VOLTS, 16 AMP, 3450 RPM.

Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris. Optional dust collector available.

Fill Door: to add media to machine and remove debris from debris screen basket inside reclaimer.

Sump Hose: 4″ flexible duct hose, from machine sump outlet to reclaimer inlet.

Media Valve: Universal feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean out.

Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.

Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.

Mylar Dispenser: Holds roll of mylar to protect viewing window. (not shown).

MVC-004L_small (1)MVC-005L_smallimage002 (1)image004 (1)
image007

image009

Inquire About This Model Inquire About This Model
+ More Info
Model M55-6

Includes:

Reclaim: High performance 600-CFM Cyclone Type.

Light Box: Two (2) tube 24″ Fluorescent light, ON-OFF control switch for light and reclaimer.

Viewing Window: Large 12″ x 20″ tempered glass. Provides long life and minimizes static build­up of dust.

Mylar with Dispenser: Mylar lens material shown with Lens dispenser.

Door Cam Latch: Adjustable door latch.

Easy Change Glove: Snap in cloth lined vinyl gloves, 7″ diameter x 26″ long

Air Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.

Cabinet Sump Clean Out Access Door: Allows recovery of small parts that may fall from blast cabinet.

Foot Blast Control: Left or right foot blast operation.

Cabinet Doors: Full opening double walled access doors.

Motor: 1 HP, 120 Volts, Single Phase, 11 Amp, 3450 RPM.

* Dust Collector: Large Dust Bag with bottom zipper.

Media Fill Door: Add media to machine and remove debris screen basket inside reclaimer

Sump Return Hose: 4″ flexible duct hose from machine sump outlet to reclaimer inlet.

Media Flow Valve: Universal feed valve allowing 2″ drain plug outlet for easy clean-out.

Media Hose: 1/2″ media line hose from reclaimer media valve to bottom fitting on blast gun.

Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.

Safety Door Interlocks: Cabinet wired with safety door interlocks to prevent accidental blasting with door open.

MAGNUM1MAGNUM2
MAGNUM3

Inquire About This Model Inquire About This Model
+ General Information

Includes:

Reclaim: High performance 600-CFM Cyclone Type.

Light Box: Two (2) tube 24″ Fluorescent light, ON-OFF control switch for light and reclaimer.

Viewing Window: Large 12″ x 20″ tempered glass. Provides long life and minimizes static build­up of dust.

Mylar with Dispenser: Mylar lens material shown with Lens dispenser.

Door Cam Latch: Adjustable door latch.

Easy Change Glove: Snap in cloth lined vinyl gloves, 7″ diameter x 26″ long

Air Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.

Cabinet Sump Clean Out Access Door: Allows recovery of small parts that may fall from blast cabinet.

Foot Blast Control: Left or right foot blast operation.

Cabinet Doors: Full opening double walled access doors.

Motor: 1 HP, 120 Volts, Single Phase, 11 Amp, 3450 RPM.

* Dust Collector: Large Dust Bag with bottom zipper.

Media Fill Door: Add media to machine and remove debris screen basket inside reclaimer

Sump Return Hose: 4″ flexible duct hose from machine sump outlet to reclaimer inlet.

Media Flow Valve: Universal feed valve allowing 2″ drain plug outlet for easy clean-out.

Media Hose: 1/2″ media line hose from reclaimer media valve to bottom fitting on blast gun.

Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.

Safety Door Interlocks: Cabinet wired with safety door interlocks to prevent accidental blasting with door open.

MAGNUM1MAGNUM2
MAGNUM3

Inquire About This Model Inquire About This Model
+ More Info
Other Magnum Models

M44-4DC – 4436 WITH 400 RECLAIMER & D10 DUST COLLECTOR
M44-4M2DC – 4436 WITH 400 RECLAIMER & M2 DUST COLLECTOR
M44-6 – 4436 WITH 600 RECLAIMER & DUST BAG
M44-6DC – 4436 WITH 600 RECLAIMER & D10 DUST COLLECTOR
M44-6M2DC – 4436 WITH 600 RECLAIMER & M2 DUST COLLECTOR
M55-6 – 5542 WITH 600 RECLAIMER & DUST BAG
M55-6DC – 5542 WITH 600 RECLAIMER & D10 DUST COLLECTOR
M55-6M2DC – 5542 WITH 600 RECLAIMER & M2 DUST COLLECTOR

M44-6PD10 – 4436 WITH 600 RECLAIMER, PRESSURE POT & D10 DUST COLLECTOR
M44-6PM2DC – 4436 WITH 600 RECLAIMER, PRESSURE POT & M2 DUST COLLECTOR
M55-6PD10 – 5542 WITH 600 RECLAIMER, PRESSURE POT & D10 DUST COLLECTOR
M55-6PM2DC – 5542 WITH 600 RECLAIMER, PRESSURE POT & M2 DUST COLLECTOR

image011image013

+ Suction Models

M44-4DC – 4436 WITH 400 RECLAIMER & D10 DUST COLLECTOR
M44-4M2DC – 4436 WITH 400 RECLAIMER & M2 DUST COLLECTOR
M44-6 – 4436 WITH 600 RECLAIMER & DUST BAG
M44-6DC – 4436 WITH 600 RECLAIMER & D10 DUST COLLECTOR
M44-6M2DC – 4436 WITH 600 RECLAIMER & M2 DUST COLLECTOR
M55-6 – 5542 WITH 600 RECLAIMER & DUST BAG
M55-6DC – 5542 WITH 600 RECLAIMER & D10 DUST COLLECTOR
M55-6M2DC – 5542 WITH 600 RECLAIMER & M2 DUST COLLECTOR

+ Pressure Models

M44-6PD10 – 4436 WITH 600 RECLAIMER, PRESSURE POT & D10 DUST COLLECTOR
M44-6PM2DC – 4436 WITH 600 RECLAIMER, PRESSURE POT & M2 DUST COLLECTOR
M55-6PD10 – 5542 WITH 600 RECLAIMER, PRESSURE POT & D10 DUST COLLECTOR
M55-6PM2DC – 5542 WITH 600 RECLAIMER, PRESSURE POT & M2 DUST COLLECTOR

image011image013